Why no results?

Anonymous

#214567

I’ve set up a filter on my website to return posts in a category by source (tag). You can see that there are posts in the category and each of the sources (tags). When I select the category and a source and then press submit, I get no results: https://musicbiz.buzz/search-test/ (All of the tags listed are attached to articles in the Classical/Opera category.

On the other hand, a search within a category works fine. For example, if you type “opera” into the search field on this page, results are returned. https://musicbiz.buzz/search-test-2/

What don’t I understand?

Trevor

#214597

This reply has been marked as private.

Anonymous

#214620

This reply has been marked as private.

Trevor

#214693

There are a number of things I see. These two settings should normally not be used, unless you have a good reason (often as guided by our technical support to do so):

https://www.screencast.com/t/9d5CmvcN

This setting needs to be removed, as it will cause a no results scenario, as the condition is empty:

https://www.screencast.com/t/w3SJhw1n

As you are using Elementor, you might want to read this post:

https://support.searchandfilter.com/forums/topic/how-can-i-search-elemntor-column-while-retaining-the-design-of-that-column/#post-209754

Anonymous

#214751

That did. Thanks!

[Author]

Posts