Support Forums

Looking for support? You can access the support system via your account.

Forums › Forums › Search & Filter Pro › Negative Number – Range Slider

Viewing 10 posts - 1 through 10 (of 12 total)
1 2
  • James Murphy
    (Private)  February 26, 2019 at 10:01 pm #203407

    Hey guys – I saw this posted a few years ago but the replies were marked as private. Same as the original poster:

    “I’m using two custom fields from ACF to create a range. The minimum includes negative numbers, but it doesn’t seem to be working properly.”

    Basically if you place the slider at a neg. number on one end and max 0 at the other, the results appear. But if you have a neg number on one end and a pos number on the other, it shows 0 results.

    Hoping there is a solution for this!

    Thanks

    Trevor Moderator
    (Private)  February 27, 2019 at 9:35 am #203431

    Can you show me a live page where this is happening?

    James Murphy
    (Private)  February 28, 2019 at 4:09 am #203548
    This reply has been marked as private.
    Trevor Moderator
    (Private)  February 28, 2019 at 6:36 am #203554
    This reply has been marked as private.
    James Murphy
    (Private)  March 1, 2019 at 5:29 am #203623

    Hey Trevor,

    I made the update and still having same issue. Anything else to try?

    Thanks

    Trevor Moderator
    (Private)  March 1, 2019 at 7:25 am #203631
    This reply has been marked as private.
    James Murphy
    (Private)  March 1, 2019 at 5:00 pm #203752
    This reply has been marked as private.
    Ross Moderator
    (Private)  March 4, 2019 at 5:40 pm #203880

    Hi James

    I believe this was fixed in an update. I’ll have a look into this tomorrow and get back with my findings.

    Thanks

    James Murphy
    (Private)  March 4, 2019 at 5:44 pm #203882

    thanks Ross -if it was fixed in an update, and I have just updated to the latest version, can you let me know (when you get to it) why it may not be working on my end? if you go to homepage noted in private reply, I left it up so you can see it not working properly. thanks!

    James Murphy
    (Private)  March 7, 2019 at 6:27 pm #204296

    Hey guys, just following up here. thanks!

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 12 total)
1 2

The topic ‘Negative Number – Range Slider’ is closed to new replies.