Multipel Tags fields

Anonymous

#260676

Hi

I have set up filtering with three dropdowns tags with multipel ids.
The idea was that when you select in the first dropdown, it should show all custom posts from this collection and when you select the next dropdown it should further filter and the same with the last.

Problem is that it filters only for the selected droupdown and not Field relationships.
These three dropdowns must filter as one. it is as with multiple selection.

Hope it makes sense, otherwise I send login to the backend.

Here you can see a little more https://recordit.co/FeIZHbfjw5

Thanks

Sasha

Trevor

#260703

It does make sense, but you need at least two additional custom taxonomies. You can use Post tags only once in a form. This post explains a bit more:

https://support.searchandfilter.com/forums/topic/elementor-filter-not-working-showing-all-results/#post-221562

But, I will be making a video to explain it better, probably tomorrow morning, so I will leave this ticket for me to action, and I will post a link to the video here.

Anonymous

#260747

Hi Travor

Thanks..
I’m going to wait for the video you’re going to make.

Sasha

Trevor

#260761

This reply has been marked as private.

Anonymous

#261564

Hi Trevor

Thank you. Great with video and audio and sound was perfect 🙂
I’ve run into another problem.

There is a filter that I need to make a copy of with you plugin pro, but I don’t know how I can make drupdown with multipel from – to values. This is the field called power and on our site is an ACF field with value from 5 to 3550. I need to line them up like here on this page where there are multiple selections from the same ACF field value.

https://www.teksan.com/en/generator-sets/

And the other field with 50 Hz and 60Hz are also ACF fields where there are products that fall under 50 or 60 Hz.

Thanks

Sasha

Trevor

#261625

I understand. I think answer 2 from this post is what you need (a second field with these ranges as text values):

https://support.searchandfilter.com/forums/topic/range-filter-stays-on/#post-254274

Anonymous

#261664

Hi Trevor

Thanks.

I am unfortunately not that technical and have only tried your plugin 1-2 times, so I’m not quite sure what you mean. Sorry 🙂

We have ACF field that start from 5 to 3550 and we must display custom posts according to the selected value. e.g 5 – 45 , 50 – 100 , 100 – 200 and so on, as a drop down.

Here you can see how I got it set up, but when I do it as you recommended as solution 2, then nothing happens. it could be that I’m doing it completely wrong 🙂
https://prnt.sc/urpsam

https://recordit.co/xOddzXyzYM

I recommend this plugin to my customer who needs a little help setting it up properly, so I do it for customer.

Thanks

Trevor

#261738

This reply has been marked as private.

Anonymous

#261816

This reply has been marked as private.

Trevor

#261857

This reply has been marked as private.

[Author]

Posts